Braillo 400 SW
Technical Specifications Braillo 440 SW
Format:
Line length: 10 - 44 characters
Sheet length: Max 330 mm (13 inches)
Sheet width: 2 page - 4 page
Page 1: Up / Down
Printing Mode: Single / Interpoint
Margins: Inner/Outer 12,7 50,8 mm (0,5 2 inches)
Page Length: Max 30 lines per page
Braille cell: Standard medium 6 dot
Line spacing: fixed 5 mm (0,2 inches)
Paper Weight: 120 - 180 g/m², Recommended 150 g/m²
Printing Speed:
440 characters per second, no of pages per hour is dependent on
page format.
Electrical:
Voltage: Single phase 220V (+/- 10 %), 50/60Hz
Current: Approx. 7 A max
Fuse Printer: 10 A
Power: Approx. 1500 W max
Environment: No / Odd / Even
Temperatures: 15 - 30°C (60 - 86°F)
Rel. Humidity: 40 - 60%
Measurements:
Height: 1430 mm
Width: 1900 mm (depending of length of belt)
Length: 3200 mm
Weight: 301 kilos
Communication with the computer:
Parallel on Centronics (25 pin D-sub female), or
Serial on RS 232 C (25 pin D-sub male).
Both are electrical isolated with opto-couplers to prevent noise
and ground loops.
Parameters for the serial port:
Baud rate: 150 - 19200
Parity: odd/even/no
Data bit: 7 / 8
Stop bit: 1 / 2
The manufacturer reserves the right to change the
specifications without further notice.
Braille writer • braille dots • braille
manual • braille symbols • braille transcription •
braille keyboard • braille reader •
braille communication • braille printers • braille
keyboards • braille labeler • braille printer •
braille printers and fax machines • braille translation
sheet • braille embosser • laser printer for braille